Data   Polar MFE   ASCII Full Res.

Polar MFE Full Resolution ASCII Data

 •  Low (1 minute)
 •  High (6 second)
 •  Full (8.3 s/s)
 •  Low (1 minute)
 •  High (6 second)
 •  Full (8 s/s)
Data resolution is 8.3 samples per second. Plots are limited to 30 minutes of data. If you need to view a longer period of data please return to our data server for the 1 minute and 6 second data.

Time Format
All data are displayed in UTC. (Note: Prior to June 2004, this data server used International Atomic Time (TAI) for data collected in 2000 and onward. TAI differs from UTC by fixed increments where a leap second occurs. On JAN 1 2000, a time in TAI could be converted to UTC by subtracting 32 seconds. For a table of conversions from TAI to UTC, click here).

The coordinate system for these high resolution data is spacecraft coordinates with Z along the rotation axis of Polar, X along projection of sun in spin plane.

Please select the data you require.

  Observed Field (Spacecraft1 coordinates only)
  Model Field2
  Observed Field minus Model Field

1 Z along spin axis; X along projection of solar direction in spin plane.
2 Model field is IGRF 95 + TSY96 with Dst = 0nT; Pdyn = 2nPa; IMFBx = Bx = Bz = 0nT

Please enter time in the fields below.

Start time:
Time format is YYYY MON DY HH:MN:SC, e.g. 1996 mar 18 01:00:00

Stop time :
The format is YYYY MON DY HH:MN:SC, e.g. 1996 mar 18 01:30:00

Visitor - Research - Library - Education - Missions - Data - Personnel - Resources - News - Help

For more information or help concerning the contents of this page, contact: polar@igpp.ucla.edu.

For more information about Space Science Center contact: www@igpp.ucla.edu.

Last updated: February 13, 2004